[Carefully Selected] 5 Recommended Octaver Effects! [In Order of Effect and Connection]

The NANO POG is the smallest in the POG series of polyphonic octave generators, and is designed to take up as little space as possible on your effects board.

Like other POG series pedals, the tracking and sound are impeccable. The DRY, SUB OCTAVE, and OCTAVE UP controls, as well as the lack of switching noise, further enhance the pedal's perfection.

●Ultra-space-saving design that doesn't take up much space
Perfect tracking for chords, sweeps and single notes
●Realizes a deep bass sound like a 12-string guitar or bass
Beautiful organ-like sound
●Adjustable volume of original pitch and upper and lower octaves
Equipped with output jacks for dry sound and effect sound
●Adapter JP9.6DC-200 included

The popular POG has evolved even further since its release, with effects reminiscent of an organ sound!

Like POG, it responds accurately and smoothly to not only single notes but also chords, and can mix five heavy octave sounds (+/- 18 octaves) like synths, organs, and 5-string guitars. The algorithm has been strengthened to improve harmonic performance.

You can also control the attack, tone, and detune of each voice, fade in the octave sounds with the attack delay, create deep low frequencies with the low-pass filter with switchable Q mode, and use the detune slider to create original sounds.
Up to eight programs can be stored on the main unit, allowing you to quickly change settings even during a live performance.

This is a heavy and musical multi-octave unit that is recommended for guitarists looking for unique effects!

True Bypass
Size: 144W x 119D x 60Hmm / Weight: 650g
Compatible power adapter: 9VDC center negative (included)

The OC-5 is the definitive octave pedal, combining BOSS' traditional octave sound with the latest tracking technology.
VINTAGE mode faithfully reproduces the sound of the legendary OC-1982 monophonic octave pedal that was released in 2, while POLY mode allows for stable playing over an even wider range of tones.
A new +1 octave sound has also been added, covering a wider range of three octaves.
Whether you're looking for fat monophonic octave sounds or range-shifted chord playing, the OC-5 offers the widest range, best playability, and refined octave sounds.

<Main features>
- A new standard in octave pedals thanks to a number of enhanced functions
Newly developed tracking technology delivers a more accurate, natural feeling with no latency.
- VINTAGE mode faithfully reproduces the monophonic sound of the legendary OC-2
In POLY mode, which is ideal for playing chords, you can use the RANGE knob to specify the frequency range to which the effect is applied.
In POLY mode, set the RANGE knob to LOWEST to get a -1 octave sound only on the lowest note of the chord.
+1OCT knob for +1 octave sound
- GUITAR/BASS switch optimizes the sound for instruments that use the tracking engine
- DIRECT OUT terminal for separate output of direct sound
・Long-term 5-year warranty for peace of mind

■ Octave pedal that delivers overwhelming performance
Equipped with the latest BOSS real-time processing technology, the OC-5 is the most expressive octave pedal ever made, delivering exceptional sound and playability.
No latency, for smooth, precise performance.
It also supports polyphonic playing over a wider range than previous models.
The OC-5 is a high-performance pedal that covers all your octave pedal needs.

■ VINTAGE mode for classic tones
In 1982, the OC-2 debuted as the world's first modern octave pedal.
Its warm, powerful sound can be heard on many historic albums, and it continues to be loved today by guitarists and bassists around the world.
The OC-5's VINTAGE mode uses cutting-edge tracking technology to deliver the iconic monophonic sound of the OC-2 with a more natural response.
The two LEVEL knobs allow you to adjust the volume of the -2 and -1 octave sounds respectively.
The DIRECT LEVEL knob also allows you to adjust the balance between direct and effect sounds, giving you complete control over the sound you want.

■ Enhanced POLY mode
Another feature of the OC-5 is its smart POLY mode, which is a further evolution of the polyphonic octave first introduced in the OC-3 SuperOctave and is fully compatible with chord playing.
The RANGE knob allows you to specify the frequency band to which the effect is applied, allowing you to create the -1 octave sound you want for melody lines or chords.
You can also get an octave sound for only the lowest note of the chord by setting the RANGE knob to LOWEST.

■Newly equipped with +1 octave sound
The OC-5 is capable of obtaining a +1 octave sound in both VINTAGE and POLY modes.
It can be used in a variety of ways, such as simulating the brilliant sound of a 12-string guitar, combining it with a -1 octave sound to add thickness to chords, or even adding a +1 octave to create a fat unison sound that adds presence when playing solo.

■ GUITAR/BASS switch and DIRECT OUT jack
By switching the GUITAR/BASS switch on the pedal itself, you can optimize the tracking engine for guitar or bass, delivering the best performance.
In addition, the DIRECT OUT terminal makes it easy to output the direct sound and effect sound separately to a mixer, audio interface, or two stage amplifiers.

Nominal input level: -20dBu
■ Input impedance: 1MΩ
Nominal output level: -20dBu
Output impedance: 1kΩ
■ Recommended load impedance: 10k Ω or more
■Bypass: Buffered bypass
■Controls: Pedal switch, GUITAR/BASS switch, VINTAGE/POLY switch, DIRECT LEVEL knob, +1OCT knob, -1OCT knob, -2OCT/RANGE knob
■Indicator: CHECK indicator (also used for battery check)
■ Connection terminals: INPUT terminal standard type, OUTPUT terminal standard type, DIRECT OUT terminal standard type, DC IN terminal
■Power supply: Alkaline battery (9V), AC adapter (sold separately)
■ Current consumption: 55mA
■ Battery life during continuous use (varies depending on usage conditions) Alkaline batteries: Approximately 7 hours
■ External dimensions: 73 (width) x 129 (depth) x 59 (height) mm
■ Weight (including batteries): 440g
■Accessories: Instruction manual, leaflet (safety precautions, usage precautions, contact information), alkaline battery (9V type, already connected to the main unit), warranty card
■Optional AC adapter: PSA-100
* 0dBu = 0.775Vrms

The Sub 'N' Up Octaver is a next-generation octave processing pedal developed based on TC's advanced pitch detection algorithm. Equipped with independent control knobs for dry mix level, octave up, 1 octave down, and 2 octaves down blend control, it provides an octave effect that follows complex chord playing and single note solo lines with ease. You can fully customize the pedal's controls and add modulation to the octave sound using the free TonePrint editor.

- Equipped with a next-generation octave processing engine that achieves perfect polyphonic (chord) tracking
- Classical monophonic octaver effects can also be reproduced
- Use the TonePrint function to add modulation to the octave tones

Toggle Switch
You can switch between three modes: "POLY" mode, which enables polyphonic tracking of chords, "CLASSIC" mode, which is ideal for classical single-note octave playing, and "TONEPRINT" mode, which allows you to use custom octaver settings via the free TonePrint editor.

●Polyphonic octave using the latest pitch shifting technology
Sub 'N' Up is equipped with the latest polyphonic pitch detection technology, allowing for ultra-fast and smooth tracking, and seamless octave effects even when playing chords. From the sparkling sounds of a 12-string guitar to the thick sounds of classic sub-octave riffs, Sub 'N' Up is the perfect tool for creating a range of effects.

Old school monophonic octave
Sub 'N' Up also supports monophonic octaves for single notes. It is effective for producing pseudo bass lines on guitar. Setting the knobs one octave down and two octaves down to a larger setting will give you a powerful low.

TonePrint compatible/Modulation octave
Sub 'N' Up is TonePrint compatible, allowing you to transfer and use presets created by artists and engineers around the world, or you can fully customize the pedal with the free TonePrint Editor software. The TonePrint Editor also gives you access to the modulation engine, allowing you to add modulation to the octave tones for special effects you've never heard before.

●DRY knob
Adjusts the level of the dry signal. A higher setting preserves the core tone without being drowned out by the octave sounds, while a lower setting enhances the octave sounds, producing an organ-like effect.

●SUB knob
Adjusts the mix level of the sound one octave lower.

●UP knob
Adjusts the mix level of the sound one octave above. Set it to a higher level and use it in conjunction with reverb or other effects to produce a brilliant, dreamy sound.

●SUB 2 knob
Adjusts the mix level of the sound two octaves lower. Higher settings provide a powerful, stage-shaking low-end tone.

●True Bypass
The Sub 'N' Up Octaver's true bypass design means it won't affect your instrument's tone when the effect is turned off, ensuring a clear and transparent sound.

●Bypass mode: True bypass (buffered bypass selectable)
●Dimensions (W x D x H): 93 x 48 x 48 mm (3.7 x 1.9 x 1.9″)
Input Connector: Standard ¼” Jack – Mono/TS
Output Connector: Standard ¼” Jack – Mono/TS
Power supply: Standard 9 V DC, center negative, >100 mA (power supply sold separately)
● Battery options: Standard 9 V (sold separately)
Input impedance: 1 MΩ
Output impedance: 100 Ω
USB Port: Mini USB connector (for editing/uploading custom TonePrints and software updates)